Understanding the Hierarchy of Fall Protection to Avoid Fall Protection Misuse
The Hierarchy of Fall Protection is the recommended order of control to eradicate or decrease fall hazards. This approach echoes regular safety practices for hazard reduction, from elimination all the way to administrative controls. With the data gathered from the fall hazard assessments, every solution in the hierarchy may be employed on every hazard.
1. Hazard Elimination
The popular solution to every fall hazard is elimination. The reason behind exposure to the fall hazard is tested to establish if changing the procedure, practice, location or equipment will block exposure to the fall hazard. Indicating HVAC (Heating, Venting and Air Conditioning) equipment be installed on the ground, or in an equipment room instead of by the edge of the roof, is one demonstration of hazard elimination.
2. Passive Fall Protection
Physical barriers – guardrails, hole covers, etc. – are forms of passive fall protection. Passive protection is mostly applied to heighten level of safety as the possibility of error is less compared to using personal protective equipment (PPE). The upfront costs of passive protection, though likely high, are typically more justified than long-term PPE costs. Passive protection may however not be guaranteed if fall hazard exposure is limited in terms of frequency and duration. An total hazard assessment gives the information required to make such kinds of decisions to boost cost-effectiveness.
3. Fall Restraint Systems
Fall restraint systems are installed so that a fall cannot take place. Fall restraint systems rely on PPE to control the worker’s range of movement to keep them from physically moving towards the fall hazard. Although fall restraint systems are usually underutilized for the reason they are not particularly mentioned in various regulations, they are still preferred over fall arrest systems. Free fall distance is not a problem for fall restraint systems, so clearance requirements, arresting forces, secondary injuries, etc. are virtually ruled out.
4.Fall Arrest Systems
Fall restraint systems are installed so that a fall can take place but is arrested within safe force and clearance limits. Fall arrest systems have more risks that come with them, because the falling worker must be stopped within an acceptable degree of force and prevented from getting in contact with the surrounding structure or with the ground. Proper training for both fall restraint and fall arrest systems is crucial.
5. Administrative Controls
Administrative controls are preventive actions taken to decrease the chances of a fall. Such include warning horns, control lines, safety monitors, and more. It must as well be noted that OSHA controls the use of several administrative controls, and it rests upon the fall protection program administrator to determine the regulations and jurisdictions relevant to them.